• June 24, 2019, 06:17:36 PM
• Welcome, Guest. Please login or register.

The Future of this Forum:

The Inkscape Project will open its first official forum, on the Inkscape website, this August (2019). (Address/link will be provided at that time.) When that happens, new registrations will no longer be allowed in this forum and Inkscape support will be provided in the new forum. This forum will still be open for a while, so that existing topics can be finished, and existing users can have access to their contents. But all potential new members should register on the Inkscape website, and post their questions in the new forum, starting in August. If you have any questions or comments, you can post them here.

Since there haven't been any new messages for so long, and no one has ever replied to this message of mine I'm considering closing this forum entirely, in approx 6 months. If anyone has any comments about that, please feel free to post them.

-- brynn


Author Topic: Inkcut cant find cutter  (Read 2135 times)

0 Members and 1 Guest are viewing this topic.

Offline Brandis

  • Newbie
  • *
  • Posts: 1
Inkcut cant find cutter
« on: February 04, 2016, 01:49:22 AM »
Hello.

We are a packaging based company with lots of things to cut. We have recently installed Inkscape and Inkcut on Lubuntu(as Ubuntu is a bit heavy for the PC i am using).
We use a SilverBullet Proffesional Series (24icnh) and although it comes with SureCutsALot when buying it, it seems to give really big errors while cutting(position and size errors) so we want to know if the softweare(scal) might be causing the errors and as inkcut is the only free cuting softweare i see it as the only otpion to see if the errors reocur.
The current problem is that inkcut is not conecting to the cutter, although i have set the BaudRate as iti is in the machine (as to the rest of the settings i do not even know where to inquire about them). It’s the first time we use that softweare (Inkscape and Inkcut and also first time using Linux System) and there might be a lot of things i am missing but i can not figure it out.

Thanks.