• September 17, 2019, 07:33:40 PM
• Welcome, Guest. Please login or register.

The Future of this Forum:

The Inkscape Project opened its first official forum on its website this month (August 2019). https://inkscape.org/forums/ In an effort to combine all the different forums into one, this forum will no longer be accepting new members or new messages. However, it will remain open for a little while, for existing members, to have access to their contents, if they need them.

Any potential new members should register on the new forum, and post their message there. There is a special board for questions about using Inkscape for cutting machines (of all kinds). (https://inkscape.org/forums/cutplot/)

If you have any questions or comments (and you're an existing member) you can post them here.

Although I've been planning to put this forum in read-only mode, at the time of this transition, unfortunately, my personal circumstances have changed, and I won't be able to host this forum much longer. I'm not sure about the time frame. It could be as soon as the end of 2019, or as long as a year from now. If anyone is interested in taking it over, please contact me.

-- brynn


Author Topic: Glass Etching  (Read 2762 times)

0 Members and 1 Guest are viewing this topic.

Offline Laurianne

  • Original Member
  • *****
  • Posts: 258
  • Country: us
  • Gender: Female
    • Eye Draw It, Red Cabin Studio
Glass Etching
« on: January 18, 2012, 08:32:05 PM »
I tried something new! Here is the result of my first attempt at glass etching. It was super easy and fun. I drew the design using Inkscape and cut it out of vinyl using my Craft Robo. I can't wait to try some more glass etching projects!

Glass after etching.JPG
*Glass after etching.JPG
(83.45 kB . 800x492)
(viewed 510 times)
Glass after etching.JPG
*Glass after etching.JPG
(83.45 kB . 800x492)
(viewed 510 times)


If you'd like to see more info on this, take a look at my last two blog posts.

http://www.eyedrawit.com/?p=1143
http://www.eyedrawit.com/?p=1116
« Last Edit: September 01, 2015, 02:46:39 PM by brynn »

Offline Butterfly

  • Original Member
  • *****
  • Posts: 331
  • Country: 00
Re: Glass Etching
« Reply #1 on: January 19, 2012, 07:33:11 AM »
Looks Great
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
I Learn something new every day, I just Forget to remember it
XP, Ink.47, Scal 2, Cricut E
http://darliciouscreations.weebly.com/

Offline attkgrandmom

  • Original Member
  • *****
  • Posts: 3
Re: Glass Etching
« Reply #2 on: January 29, 2013, 07:01:04 AM »
I know this is an older post, but it sure is nice looking!
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »