• September 17, 2019, 07:38:26 PM
• Welcome, Guest. Please login or register.

The Future of this Forum:

The Inkscape Project opened its first official forum on its website this month (August 2019). https://inkscape.org/forums/ In an effort to combine all the different forums into one, this forum will no longer be accepting new members or new messages. However, it will remain open for a little while, for existing members, to have access to their contents, if they need them.

Any potential new members should register on the new forum, and post their message there. There is a special board for questions about using Inkscape for cutting machines (of all kinds). (https://inkscape.org/forums/cutplot/)

If you have any questions or comments (and you're an existing member) you can post them here.

Although I've been planning to put this forum in read-only mode, at the time of this transition, unfortunately, my personal circumstances have changed, and I won't be able to host this forum much longer. I'm not sure about the time frame. It could be as soon as the end of 2019, or as long as a year from now. If anyone is interested in taking it over, please contact me.

-- brynn


Author Topic: Lauras Owls  (Read 5868 times)

0 Members and 1 Guest are viewing this topic.

Offline Angel13

  • Original Member
  • *****
  • Posts: 635
  • Country: 00
    • http://cardsulike.blogspot.com/
Lauras Owls
« on: February 05, 2012, 11:58:42 AM »
Decided to try a makeover on Laura's Owls that can be found here: http://www.inkscapecuttingdesign.com/smf/index.php?topic=546 .0 used different coloured backgrounds to highlight different looks for the main design.......
« Last Edit: September 03, 2015, 09:31:22 AM by brynn »
http://cardsulike.blogspot.com/
http://www.craftsuprint.com/default.cfm?designer=379

Windows Vista, Silhouette Cutter same as Craft Robo(Mini Expert) Cameo Beginner, Inkscape, Cougar(Learning curb going on!!)

Offline Angel13

  • Original Member
  • *****
  • Posts: 635
  • Country: 00
    • http://cardsulike.blogspot.com/
Re: Lauras Owls
« Reply #1 on: February 05, 2012, 12:23:59 PM »
OK went to do another add another filter, so did a duplicate of the first owl and added an extra filter and both of the owls changed at the same time; and I still can't figure out why????
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
http://cardsulike.blogspot.com/
http://www.craftsuprint.com/default.cfm?designer=379

Windows Vista, Silhouette Cutter same as Craft Robo(Mini Expert) Cameo Beginner, Inkscape, Cougar(Learning curb going on!!)

Offline Laurianne

  • Original Member
  • *****
  • Posts: 258
  • Country: us
  • Gender: Female
    • Eye Draw It, Red Cabin Studio
Re: Lauras Owls
« Reply #2 on: February 05, 2012, 01:22:58 PM »
I don't know what you did.... but those are so cute!
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline Angel13

  • Original Member
  • *****
  • Posts: 635
  • Country: 00
    • http://cardsulike.blogspot.com/
Re: Lauras Owls
« Reply #3 on: February 05, 2012, 01:27:05 PM »
Quick tuts coming up......
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
http://cardsulike.blogspot.com/
http://www.craftsuprint.com/default.cfm?designer=379

Windows Vista, Silhouette Cutter same as Craft Robo(Mini Expert) Cameo Beginner, Inkscape, Cougar(Learning curb going on!!)

Offline Angel13

  • Original Member
  • *****
  • Posts: 635
  • Country: 00
    • http://cardsulike.blogspot.com/
Re: Lauras Owls
« Reply #4 on: February 05, 2012, 02:14:00 PM »
OK Laurianne here the SVG of Laura's Owl  for you to play with, I was intending to use it as a Card topper. Lauras Owl1.svg


The pictorial for the effects are here: http://www.inkscapecuttingdesign.com/smf/index.php?topic=853.0

Ooo forgot to say that the Owl Eye Brows, eyes, beak and feet are all grouped in the file.
« Last Edit: September 03, 2015, 09:32:23 AM by brynn »
http://cardsulike.blogspot.com/
http://www.craftsuprint.com/default.cfm?designer=379

Windows Vista, Silhouette Cutter same as Craft Robo(Mini Expert) Cameo Beginner, Inkscape, Cougar(Learning curb going on!!)

Offline lkc

  • Original Member
  • *****
  • Posts: 150
  • Country: 00
    • http://thealliancetrader.blogspot.com/
Re: Lauras Owls
« Reply #5 on: February 05, 2012, 02:55:30 PM »
Ooooh, pretty effects...really like the one on the right with the dark background!
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Laura
LKC Designs
________________________________________________________________________________________
Owner of Cricut Expressions, Windows Vista, 7 & 8, Inkscape 0.46, 0.48, Scal1, CorelDraw and  a spoiled rotten chinchilla!

Offline PapaSue

  • Original Member
  • *****
  • Posts: 571
    • http://creationsbypapasue.blogspot.com
Re: Lauras Owls
« Reply #6 on: February 05, 2012, 02:58:46 PM »
Love the dark one too.  Angela, will you share how you got that terrific embossed look?  I've never been that successful.

TKS
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Susan
http://creationsbypapasue.blogspot.com/
OLDER:  http://papasuecreative.blogspot.com (blog deleted)
Learn, Grow, Create, Share
Macintosh, Mavericks, Inkscape 0.91, eClips1, eCAL2.013

Offline Angel13

  • Original Member
  • *****
  • Posts: 635
  • Country: 00
    • http://cardsulike.blogspot.com/
Re: Lauras Owls
« Reply #7 on: February 05, 2012, 03:13:30 PM »
OK you know what I said about writing down the filter selections!!! Well I didn't, but I think its this formula: Filter/Textures/Rough & Glossy then Filter/Materials/3D Wood
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
http://cardsulike.blogspot.com/
http://www.craftsuprint.com/default.cfm?designer=379

Windows Vista, Silhouette Cutter same as Craft Robo(Mini Expert) Cameo Beginner, Inkscape, Cougar(Learning curb going on!!)

Offline lkc

  • Original Member
  • *****
  • Posts: 150
  • Country: 00
    • http://thealliancetrader.blogspot.com/
Re: Lauras Owls
« Reply #8 on: February 05, 2012, 08:34:41 PM »
Okay...I grabbed one of my other owls...but did try to show the steps in my latest blog post below..

http://thealliancetrader.blogspot.com/2012/02/using-inkscape-048-filters.html

« Last Edit: September 03, 2015, 09:33:17 AM by brynn »
Laura
LKC Designs
________________________________________________________________________________________
Owner of Cricut Expressions, Windows Vista, 7 & 8, Inkscape 0.46, 0.48, Scal1, CorelDraw and  a spoiled rotten chinchilla!

Offline Laurianne

  • Original Member
  • *****
  • Posts: 258
  • Country: us
  • Gender: Female
    • Eye Draw It, Red Cabin Studio
Re: Lauras Owls
« Reply #9 on: February 05, 2012, 10:38:13 PM »
Ok... I had a little fun with Laura's Owl.

« Last Edit: September 03, 2015, 09:33:31 AM by brynn »

Offline lkc

  • Original Member
  • *****
  • Posts: 150
  • Country: 00
    • http://thealliancetrader.blogspot.com/
Re: Lauras Owls
« Reply #10 on: February 05, 2012, 10:50:23 PM »
Hey...there we go! How fun...what did you use for the effect?
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Laura
LKC Designs
________________________________________________________________________________________
Owner of Cricut Expressions, Windows Vista, 7 & 8, Inkscape 0.46, 0.48, Scal1, CorelDraw and  a spoiled rotten chinchilla!

Offline Angel13

  • Original Member
  • *****
  • Posts: 635
  • Country: 00
    • http://cardsulike.blogspot.com/
Re: Lauras Owls
« Reply #11 on: February 06, 2012, 05:03:37 AM »
Laura will have to try that effect and Laurianne I do like that squiggly effect.....
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
http://cardsulike.blogspot.com/
http://www.craftsuprint.com/default.cfm?designer=379

Windows Vista, Silhouette Cutter same as Craft Robo(Mini Expert) Cameo Beginner, Inkscape, Cougar(Learning curb going on!!)

Offline sstehman

  • Original Member
  • *****
  • Posts: 28
Re: Lauras Owls
« Reply #12 on: February 06, 2012, 05:16:33 AM »
Oh, I love the copper tone. So cute, too.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline Angel13

  • Original Member
  • *****
  • Posts: 635
  • Country: 00
    • http://cardsulike.blogspot.com/
Re: Lauras Owls
« Reply #13 on: February 06, 2012, 07:01:16 AM »
Quote from: "sstehman"
Oh, I love the copper tone. So cute, too.

So are you going to join us and play????
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
http://cardsulike.blogspot.com/
http://www.craftsuprint.com/default.cfm?designer=379

Windows Vista, Silhouette Cutter same as Craft Robo(Mini Expert) Cameo Beginner, Inkscape, Cougar(Learning curb going on!!)

Offline PapaSue

  • Original Member
  • *****
  • Posts: 571
    • http://creationsbypapasue.blogspot.com
Re: Lauras Owls
« Reply #14 on: February 06, 2012, 06:14:42 PM »
Welcome Laurieane, I was beginning to worry that Angela, Laura and I were talking to ourselves.. good to have you aboard.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Susan
http://creationsbypapasue.blogspot.com/
OLDER:  http://papasuecreative.blogspot.com (blog deleted)
Learn, Grow, Create, Share
Macintosh, Mavericks, Inkscape 0.91, eClips1, eCAL2.013

Offline lkc

  • Original Member
  • *****
  • Posts: 150
  • Country: 00
    • http://thealliancetrader.blogspot.com/
Re: Lauras Owls
« Reply #15 on: February 06, 2012, 06:53:47 PM »
Quote from: PapaSue
Welcome Laurieane, I was beginning to worry that Angela, Laura and I were talking to ourselves...


Never stopped us before...  :lol:  :lol:  :lol:
« Last Edit: September 03, 2015, 09:34:11 AM by brynn »
Laura
LKC Designs
________________________________________________________________________________________
Owner of Cricut Expressions, Windows Vista, 7 & 8, Inkscape 0.46, 0.48, Scal1, CorelDraw and  a spoiled rotten chinchilla!

Offline lkc

  • Original Member
  • *****
  • Posts: 150
  • Country: 00
    • http://thealliancetrader.blogspot.com/
Re: Lauras Owls
« Reply #16 on: February 06, 2012, 06:56:45 PM »
but always good to have others join in!!!   :D  :D  :D
« Last Edit: September 03, 2015, 09:35:00 AM by brynn »
Laura
LKC Designs
________________________________________________________________________________________
Owner of Cricut Expressions, Windows Vista, 7 & 8, Inkscape 0.46, 0.48, Scal1, CorelDraw and  a spoiled rotten chinchilla!

Offline Butterfly

  • Original Member
  • *****
  • Posts: 331
  • Country: 00
Re: Lauras Owls
« Reply #17 on: February 07, 2012, 09:16:02 AM »
TOO TOO SWEET ALL OF THEM
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
I Learn something new every day, I just Forget to remember it
XP, Ink.47, Scal 2, Cricut E
http://darliciouscreations.weebly.com/

Offline Sunny50

  • Original Member
  • *****
  • Posts: 13
Re: Lauras Owls
« Reply #18 on: March 17, 2012, 06:29:13 PM »
Love this technique   so pretty
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »