• September 18, 2019, 02:46:29 PM
• Welcome, Guest. Please login or register.

The Future of this Forum:

The Inkscape Project opened its first official forum on its website this month (August 2019). https://inkscape.org/forums/ In an effort to combine all the different forums into one, this forum will no longer be accepting new members or new messages. However, it will remain open for a little while, for existing members, to have access to their contents, if they need them.

Any potential new members should register on the new forum, and post their message there. There is a special board for questions about using Inkscape for cutting machines (of all kinds). (https://inkscape.org/forums/cutplot/)

If you have any questions or comments (and you're an existing member) you can post them here.

Although I've been planning to put this forum in read-only mode, at the time of this transition, unfortunately, my personal circumstances have changed, and I won't be able to host this forum much longer. I'm not sure about the time frame. It could be as soon as the end of 2019, or as long as a year from now. If anyone is interested in taking it over, please contact me.

-- brynn


Author Topic: Cameo and Craft Artist  (Read 3143 times)

0 Members and 1 Guest are viewing this topic.

Offline Pam T

  • Original Member
  • *****
  • Posts: 21
Cameo and Craft Artist
« on: August 31, 2012, 08:54:53 AM »
I have recently become the owner of a Cameo and I have read that you can use your Cameo to cut from Craft Artist.  I have got so far as I have installed Cameo driver and Craft Artist now recognises the Cameo but I am unable to access the 'controller' so I am stuck.  :roll:  Just wondering if anyone has successfully managed to use a cutting machine with Craft Artist.  Many thanks.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline Angel13

  • Original Member
  • *****
  • Posts: 635
  • Country: 00
    • http://cardsulike.blogspot.com/
Re: Cameo and Craft Artist
« Reply #1 on: September 01, 2012, 05:28:06 PM »
Hi PamT
I haven't heard of this myself but I did a google search and found this on another Silhouette Cameo website: http://www.ukscrappers.co.uk/boards/sho ... aft+artist hope this helps.....
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
http://cardsulike.blogspot.com/
http://www.craftsuprint.com/default.cfm?designer=379

Windows Vista, Silhouette Cutter same as Craft Robo(Mini Expert) Cameo Beginner, Inkscape, Cougar(Learning curb going on!!)

Offline Pam T

  • Original Member
  • *****
  • Posts: 21
Re: Cameo and Craft Artist
« Reply #2 on: September 04, 2012, 01:34:15 AM »
Thank  you for the link Angel.  I have spent a lot of time looking on the internet and seems everyone else had the same problem.  Gave up as wasting precious cutting time.  :)
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline Technomum

  • Original Member
  • *****
  • Posts: 240
Re: Cameo and Craft Artist
« Reply #3 on: September 22, 2012, 07:06:41 AM »
Pam you will need Studio Designer Version.  Is that what you are using?  I gather there are a lot of people having problems but I have also heard that some people are cutting from CA2.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Cardmaking, Scrapbooking,
Inkscape, KNK, Funtime, RM