• October 21, 2019, 05:25:11 PM
• Welcome, Guest. Please login or register.

The Future of this Forum:

The Inkscape Project opened its first official forum on its website this month (August 2019). https://inkscape.org/forums/ In an effort to combine all the different forums into one, this forum will no longer be accepting new members or new messages. However, it will remain open for a little while, for existing members, to have access to their contents, if they need them.

Any potential new members should register on the new forum, and post their message there. There is a special board for questions about using Inkscape for cutting machines (of all kinds). (https://inkscape.org/forums/cutplot/)

If you have any questions or comments (and you're an existing member) you can post them here.

Although I've been planning to put this forum in read-only mode, at the time of this transition, unfortunately, my personal circumstances have changed, and I won't be able to host this forum much longer. I'm not sure about the time frame. It could be as soon as the end of 2019, or as long as a year from now. If anyone is interested in taking it over, please contact me.

-- brynn


Author Topic: Set of lattice style Christmas trees  (Read 3584 times)

0 Members and 1 Guest are viewing this topic.

Offline Aussie Carolyn

  • Original Member
  • *****
  • Posts: 1,025
  • Country: au
  • Gender: Female
    • Cut Two Pieces
Set of lattice style Christmas trees
« on: November 27, 2012, 08:19:02 PM »
No photo's at this stage as I have already used the ones I cut out when testing the file. Below is a screenshot of the trees I am sharing.
If you are using a thin paper for the tag you may prefer to remove the dashed fold line first. I found out the hard way and had the tag separate into two pieces.

trees.JPG
*trees.JPG
(84.52 kB . 1278x424)
(viewed 685 times)


*Christmas Trees C2P.svg
(25.56 kB - downloaded 260 times)


NOTE
I will be sharing the file with forum members and it will be available shortly via my blog. Please do not share the file on any other website and direct anyone interested to the file to get their own copy. If I hear of ANY of my files being shared on other forums, even if they are altered slightly, I will remove all shared files and will not be adding any more.
« Last Edit: September 03, 2015, 09:10:04 AM by brynn »

Offline scud

  • Original Member
  • *****
  • Posts: 154
Re: Set of lattice style Christmas trees
« Reply #1 on: November 28, 2012, 03:21:49 AM »
Thank you Caroline.
Barbara
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline Siskramer

  • Original Member
  • *****
  • Posts: 11
Re: Set of lattice style Christmas trees
« Reply #2 on: November 28, 2012, 10:33:48 PM »
These are beautiful, will look forward to the share.... thank you
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline grammy

  • Original Member
  • *****
  • Posts: 20
Re: Set of lattice style Christmas trees
« Reply #3 on: December 26, 2012, 10:07:09 AM »
What a neat tree design...thank you!
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Windows XP, New to InkScape, Cricut and MTC

Offline maddyg

  • Original Member
  • *****
  • Posts: 6
Re: Set of lattice style Christmas trees
« Reply #4 on: February 04, 2013, 08:20:54 AM »
thank you...
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »