• August 25, 2019, 05:59:15 AM
• Welcome, Guest. Please login or register.

The Future of this Forum:

The Inkscape Project opened its first official forum on its website this month (August 2019). https://inkscape.org/forums/ In an effort to combine all the different forums into one, this forum will no longer be accepting new members or new messages. However, it will remain open for a little while, for existing members, to have access to their contents, if they need them.

Any potential new members should register on the new forum, and post their message there. There is a special board for questions about using Inkscape for cutting machines (of all kinds). (https://inkscape.org/forums/cutplot/)

If you have any questions or comments (and you're an existing member) you can post them here.

Although I've been planning to put this forum in read-only mode, at the time of this transition, unfortunately, my personal circumstances have changed, and I won't be able to host this forum much longer. I'm not sure about the time frame. It could be as soon as the end of 2019, or as long as a year from now. If anyone is interested in taking it over, please contact me.

-- brynn


Author Topic: FAN for Mothers Day  (Read 3094 times)

0 Members and 1 Guest are viewing this topic.

Offline PapaSue

  • Original Member
  • *****
  • Posts: 571
    • http://creationsbypapasue.blogspot.com
FAN for Mothers Day
« on: May 06, 2013, 12:56:44 PM »
I"m a big fan of my DILs and my Daughter.  After all they've given us 6 beautiful, smart, well mannered grandchilden.  We are BIG fans.

For the card I used object to pattern using a seamless pattern from RepperPro to create the nice looking fan, the svg file is plain tho.  There is the whole fan and the individual pieces to make it for easy cutting and assembly should you be inclined to cut and assemble.

« Last Edit: September 03, 2015, 08:37:33 AM by brynn »
Susan
http://creationsbypapasue.blogspot.com/
OLDER:  http://papasuecreative.blogspot.com (blog deleted)
Learn, Grow, Create, Share
Macintosh, Mavericks, Inkscape 0.91, eClips1, eCAL2.013

Offline scud

  • Original Member
  • *****
  • Posts: 154
Re: FAN for Mothers Day
« Reply #1 on: May 07, 2013, 06:02:13 AM »
Thank you Susan
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline brianna_c1

  • Original Member
  • *****
  • Posts: 1
Re: FAN for Mothers Day
« Reply #2 on: May 07, 2013, 02:41:24 PM »
thank you for sharing your lovely design
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline afellin

  • Original Member
  • *****
  • Posts: 15
Re: FAN for Mothers Day
« Reply #3 on: November 03, 2013, 06:48:27 AM »
Thank you!
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »