• August 16, 2018, 08:18:45 AM
• Welcome, Guest. Please login or register.
Did you miss your activation email?

Author Topic: fill and stroke  (Read 1975 times)

0 Members and 1 Guest are viewing this topic.

Offline aldridge

  • Original Member
  • *****
  • Posts: 1
fill and stroke
« on: November 08, 2014, 04:22:03 AM »
hi guys im a bit stuck i am trying to design a duel layer vinyl i type my required font and then fill and stroke it to 1cm then write the font again underneath save it open sign cut and only the standard font shows up and not the one that is filled and stroked ?
any help please
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline PapaSue

  • Original Member
  • *****
  • Posts: 571
    • http://creationsbypapasue.blogspot.com
Re: fill and stroke
« Reply #1 on: November 10, 2014, 10:54:53 AM »
Hi, I don't do signcut but did you convert the text to a path?  If you want to post the file someone will be able to diagnose the issue for you.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Susan
http://creationsbypapasue.blogspot.com/
OLDER:  http://papasuecreative.blogspot.com (blog deleted)
Learn, Grow, Create, Share
Macintosh, Mavericks, Inkscape 0.91, eClips1, eCAL2.013

Offline Aussie Carolyn

  • Original Member
  • *****
  • Posts: 1,025
  • Country: au
  • Gender: Female
    • Cut Two Pieces
Re: fill and stroke
« Reply #2 on: November 13, 2014, 04:53:20 PM »
Hi, I use to use Sign Cut but swapped to a different program about 2 years ago. If I have read your question correctly I don't think it is a Sign Cut error, I think it is the Inkscape file. I would suggest you look at your design in outline mode (view>display mode> outline). The design will now show only outlines which also happen to be your cutting lines. If you create a shape, text, etc and add a stroke the cutter does not recognise the stroke width. If you have a thin line instead of the desired thicker line, select the text and apply Path>Stroke to Path.
As I mentioned in outline mode you will see that stroke width does not show. If you have two lots of text on top of each other and one has a thicker stroke, in outline mode they will look identical and it will appear as if there is only one lot of text.
Like Susan said in her comment, if you can post the file here, we can have a look and try to help further.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »