• October 23, 2019, 07:35:31 AM
• Welcome, Guest. Please login or register.

The Future of this Forum:

The Inkscape Project opened its first official forum on its website this month (August 2019). https://inkscape.org/forums/ In an effort to combine all the different forums into one, this forum will no longer be accepting new members or new messages. However, it will remain open for a little while, for existing members, to have access to their contents, if they need them.

Any potential new members should register on the new forum, and post their message there. There is a special board for questions about using Inkscape for cutting machines (of all kinds). (https://inkscape.org/forums/cutplot/)

If you have any questions or comments (and you're an existing member) you can post them here.

Although I've been planning to put this forum in read-only mode, at the time of this transition, unfortunately, my personal circumstances have changed, and I won't be able to host this forum much longer. I'm not sure about the time frame. It could be as soon as the end of 2019, or as long as a year from now. If anyone is interested in taking it over, please contact me.

-- brynn


Author Topic: "Etched" Transom Window  (Read 4964 times)

0 Members and 1 Guest are viewing this topic.

Offline Laurianne

  • Original Member
  • *****
  • Posts: 258
  • Country: us
  • Gender: Female
    • Eye Draw It, Red Cabin Studio
"Etched" Transom Window
« on: October 27, 2015, 08:23:31 PM »
When we built our home 9 years ago, we planned to put a transom window above the doorway between our kitchen and office. I didn't plan on it taking so long to get around to finishing it, but we just couldn't decide exactly what we wanted to do with it.

This summer we finally finished up the project. My husband made a frame with 3 sections and designed it to match our kitchen cabinets. We bought seeded glass for the two outer sections, and clear glass for the larger, middle section. I wanted to design something for the main section and considered a few options. In the end, my husband and I decided an etched look would be nice.

I put a lot of thought into this project and I wanted to do something that held some special meaning. I decided to use Inkscape to design a theme that depicted memories from my childhood, and was in keeping with the rustic theme of our log home. The design I ended up with was of my late father and me fly fishing. On the river's edge, I included the little log cabin that was on our property prior to building our current home.

After creating my design, I used my KNK Zing to cut Oracal 8810 Frosted Cast vinyl. I applied my vinyl design and hubby installed the window. I am very happy with the results. It's nice to have something that brings back such fond memories for me.transome peeling backing 2.JPG
*transome peeling backing 2.JPG
(3522.61 kB . 4608x3072)
(viewed 492 times)
DSC_0089.JPG
*DSC_0089.JPG
(3507.98 kB . 4608x3072)
(viewed 491 times)

Offline brynn

  • Administrator
  • *****
  • Posts: 316
  • Country: us
  • Gender: Female
    • Inkscape Community
Re: "Etched" Transom Window
« Reply #1 on: October 27, 2015, 08:49:19 PM »
Oh, that's awesome!  Gorgeous  ;)
  • 0.92.2
  • Windows 7 Pro, 64-bit

Offline Laurianne

  • Original Member
  • *****
  • Posts: 258
  • Country: us
  • Gender: Female
    • Eye Draw It, Red Cabin Studio
Re: "Etched" Transom Window
« Reply #2 on: October 27, 2015, 09:27:51 PM »
Thanks, Brynn. Glad you like it!

Offline PapaSue

  • Original Member
  • *****
  • Posts: 571
    • http://creationsbypapasue.blogspot.com
Re: "Etched" Transom Window
« Reply #3 on: November 08, 2015, 09:44:22 AM »
Really nice design that you can use elsewhere too. Thanks for sharing!
Susan
http://creationsbypapasue.blogspot.com/
OLDER:  http://papasuecreative.blogspot.com (blog deleted)
Learn, Grow, Create, Share
Macintosh, Mavericks, Inkscape 0.91, eClips1, eCAL2.013

Offline HeatherM

  • Original Member
  • *****
  • Posts: 207
  • Country: 00
    • http://imagesbyheatherm.wordpress.com/
Re: "Etched" Transom Window
« Reply #4 on: November 09, 2015, 08:38:27 AM »
It turned out beautiful!   :ur:
Heather
http://imagesbyheatherm.wordpress.com/
Mac OSX, Inkscape, eClips, Silhouette Cameo

Offline Laurianne

  • Original Member
  • *****
  • Posts: 258
  • Country: us
  • Gender: Female
    • Eye Draw It, Red Cabin Studio
Re: "Etched" Transom Window
« Reply #5 on: November 09, 2015, 12:51:30 PM »
Thanks Susan and Heather!