• October 14, 2019, 12:35:09 AM
• Welcome, Guest. Please login or register.

The Future of this Forum:

The Inkscape Project opened its first official forum on its website this month (August 2019). https://inkscape.org/forums/ In an effort to combine all the different forums into one, this forum will no longer be accepting new members or new messages. However, it will remain open for a little while, for existing members, to have access to their contents, if they need them.

Any potential new members should register on the new forum, and post their message there. There is a special board for questions about using Inkscape for cutting machines (of all kinds). (https://inkscape.org/forums/cutplot/)

If you have any questions or comments (and you're an existing member) you can post them here.

Although I've been planning to put this forum in read-only mode, at the time of this transition, unfortunately, my personal circumstances have changed, and I won't be able to host this forum much longer. I'm not sure about the time frame. It could be as soon as the end of 2019, or as long as a year from now. If anyone is interested in taking it over, please contact me.

-- brynn


Author Topic: Heat Transfer Vinyl  (Read 6136 times)

0 Members and 1 Guest are viewing this topic.

Offline MNCRAFTER

  • Newbie
  • *
  • Posts: 1
Heat Transfer Vinyl
« on: September 16, 2016, 08:06:25 AM »
I just joined this group and hoping to learn some things using inkscape.  I have owned it for a lon g tim e and only do basic things.  My attachment is a project I did for the santa sacks last year.  Which was a design I bought so not a good example of creating.
Hope more people are on board for other ideas.   ThanksIMG_3625.jpg
*IMG_3625.jpg
(1805.35 kB . 2448x2448)
(viewed 765 times)

Offline PapaSue

  • Original Member
  • *****
  • Posts: 571
    • http://creationsbypapasue.blogspot.com
Re: Heat Transfer Vinyl
« Reply #1 on: September 25, 2016, 10:32:56 PM »
Welcome! Like your design hope to see more. There are a bunch of tuts here on using Inkscape and questions are always welcome
Susan
http://creationsbypapasue.blogspot.com/
OLDER:  http://papasuecreative.blogspot.com (blog deleted)
Learn, Grow, Create, Share
Macintosh, Mavericks, Inkscape 0.91, eClips1, eCAL2.013

Offline JohnLi

  • Newbie
  • *
  • Posts: 1
Re: Heat Transfer Vinyl
« Reply #2 on: April 30, 2018, 07:34:13 AM »
Those look really nice, MNCrafter. How long does it take for a single one of those? They look rather intricate.