• October 23, 2019, 02:26:17 AM
• Welcome, Guest. Please login or register.

The Future of this Forum:

The Inkscape Project opened its first official forum on its website this month (August 2019). https://inkscape.org/forums/ In an effort to combine all the different forums into one, this forum will no longer be accepting new members or new messages. However, it will remain open for a little while, for existing members, to have access to their contents, if they need them.

Any potential new members should register on the new forum, and post their message there. There is a special board for questions about using Inkscape for cutting machines (of all kinds). (https://inkscape.org/forums/cutplot/)

If you have any questions or comments (and you're an existing member) you can post them here.

Although I've been planning to put this forum in read-only mode, at the time of this transition, unfortunately, my personal circumstances have changed, and I won't be able to host this forum much longer. I'm not sure about the time frame. It could be as soon as the end of 2019, or as long as a year from now. If anyone is interested in taking it over, please contact me.

-- brynn


Author Topic: Inkscape logo using circular grids  (Read 2598 times)

0 Members and 1 Guest are viewing this topic.

Offline iconocracia

  • Sr. Newbie
  • **
  • Posts: 2
Inkscape logo using circular grids
« on: July 31, 2017, 12:56:23 PM »
This is a tutorial I created for making a logo using circular grids.  The logo itself was created by Franco Grignani in 1964.  imitating the masters is a great way to learn!

http://emergentdesigner.com/inkscape-logo-tutorial/
« Last Edit: August 01, 2017, 07:51:15 AM by iconocracia »

Offline PapaSue

  • Original Member
  • *****
  • Posts: 571
    • http://creationsbypapasue.blogspot.com
Re: Inkscape logo using circular grids
« Reply #1 on: July 31, 2017, 09:34:54 PM »
Loved the tut, than u for posting it.  Will give it a trial run tomorrow.
Susan
http://creationsbypapasue.blogspot.com/
OLDER:  http://papasuecreative.blogspot.com (blog deleted)
Learn, Grow, Create, Share
Macintosh, Mavericks, Inkscape 0.91, eClips1, eCAL2.013

Offline iconocracia

  • Sr. Newbie
  • **
  • Posts: 2
Re: Inkscape logo using circular grids
« Reply #2 on: August 01, 2017, 07:51:48 AM »
Thank you so much!

Offline brynn

  • Administrator
  • *****
  • Posts: 316
  • Country: us
  • Gender: Female
    • Inkscape Community
Re: Inkscape logo using circular grids
« Reply #3 on: August 01, 2017, 09:03:08 AM »
As I commented to this message on InkscapeForum.com, I would not use the Eraser tool.  It tends to be buggy, in my experience.  I would use path operation such as Difference or Cut Path, with a duplicate of the larger crescents used to "cut off" the tips of the smaller crescents.
  • 0.92.2
  • Windows 7 Pro, 64-bit