• February 23, 2020, 12:16:33 AM
• Welcome, Guest. Please login or register.

The Future of this Forum:

The Inkscape Project opened its first official forum on its website this month (August 2019). https://inkscape.org/forums/ In an effort to combine all the different forums into one, this forum will no longer be accepting new members or new messages. However, it will remain open for a little while, for existing members, to have access to their contents, if they need them.

Any potential new members should register on the new forum, and post their message there. There is a special board for questions about using Inkscape for cutting machines (of all kinds). (https://inkscape.org/forums/cutplot/)

If you have any questions or comments (and you're an existing member) you can post them here.

Although I've been planning to put this forum in read-only mode, at the time of this transition, unfortunately, my personal circumstances have changed, and I won't be able to host this forum much longer. I'm not sure about the time frame. It could be as soon as the end of 2019, or as long as a year from now. If anyone is interested in taking it over, please contact me.

-- brynn

Author Topic: Hi from DownUnder!!  (Read 2711 times)

0 Members and 1 Guest are viewing this topic.

Offline Aus

  • Original Member
  • *****
  • Posts: 1
Hi from DownUnder!!
« on: July 14, 2010, 06:59:25 PM »
Hi I'm Aus
I arrived here because Angela sent an email lol
I am an artist using Poser, PSP, Bryce, and a few other graphic programs but those are the 'main' ones I use.

I don't have a 'cutter' at the moment but it is something I'm looking at somewhere down the track.   I also have only recently heard about Inkscape so will be looking with interest and the use of it in here.....is it 'user friendly', what can be done, etc.

And good luck with your new forum!!!
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline Angel13

  • Original Member
  • *****
  • Posts: 635
  • Country: 00
    • http://cardsulike.blogspot.com/
Re: Hi from DownUnder!!
« Reply #1 on: July 14, 2010, 07:30:29 PM »
Hi Aus

Thanks for visiting and hopefully we will start to have some Inkscape Tutorials, Pictorials and answers to go............ :lol:  :lol:  :lol:
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Windows Vista, Silhouette Cutter same as Craft Robo(Mini Expert) Cameo Beginner, Inkscape, Cougar(Learning curb going on!!)

Offline Aussie Carolyn

  • Original Member
  • *****
  • Posts: 1,025
  • Country: au
  • Gender: Female
    • Cut Two Pieces
Re: Hi from DownUnder!!
« Reply #2 on: July 15, 2010, 01:34:13 AM »
Hi Aus, Welcome. Hopefully we can make the learning of Inkscape easier for you. Ask any questions when you are ready to start.

As you can guess by my name I am also an Aussie. Which state do you live in?
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »