• November 22, 2019, 06:55:03 AM
• Welcome, Guest. Please login or register.

The Future of this Forum:

The Inkscape Project opened its first official forum on its website this month (August 2019). https://inkscape.org/forums/ In an effort to combine all the different forums into one, this forum will no longer be accepting new members or new messages. However, it will remain open for a little while, for existing members, to have access to their contents, if they need them.

Any potential new members should register on the new forum, and post their message there. There is a special board for questions about using Inkscape for cutting machines (of all kinds). (https://inkscape.org/forums/cutplot/)

If you have any questions or comments (and you're an existing member) you can post them here.

Although I've been planning to put this forum in read-only mode, at the time of this transition, unfortunately, my personal circumstances have changed, and I won't be able to host this forum much longer. I'm not sure about the time frame. It could be as soon as the end of 2019, or as long as a year from now. If anyone is interested in taking it over, please contact me.

-- brynn


Author Topic: Need a little help...AGAIN  (Read 3425 times)

0 Members and 1 Guest are viewing this topic.

Offline Butterfly

  • Original Member
  • *****
  • Posts: 331
  • Country: 00
Need a little help...AGAIN
« on: February 18, 2011, 09:22:24 AM »
I created this file for someone over on the craftedge forum I am pretty proud of myself for what I did get done but not sure if I got it all quite right. I should have come here before I posted the file but I am going to cross my fingers and hope that it is ok.


What I need is if someone could test cut this for me and help me by going over it and tell me what I could have or should have done. My machine is down right now because my 83  year old father has my blade housing for measurements making me the part to use sharpies. (WOO HOO) I don't know why it took me this long to ask him to make them it is right up his alley he is a retired tool and die maker.

So if anyone could do a test cut for me I would be grateful and any guidance is WELCOMED
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
I Learn something new every day, I just Forget to remember it
XP, Ink.47, Scal 2, Cricut E
http://darliciouscreations.weebly.com/

Offline PapaSue

  • Original Member
  • *****
  • Posts: 571
    • http://creationsbypapasue.blogspot.com
Re: Need a little help...AGAIN
« Reply #1 on: February 18, 2011, 10:21:29 AM »
Hi, the file is fine for cutting, all it really needs is some BLING!  Add ruffles, or eyelet lace.  If you send me your email I'll send you what I did with it yesterday.  I could not even get a good base for the basinette myself so I played with yours.

Susan
sesusan86@gmail.com
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Susan
http://creationsbypapasue.blogspot.com/
OLDER:  http://papasuecreative.blogspot.com (blog deleted)
Learn, Grow, Create, Share
Macintosh, Mavericks, Inkscape 0.91, eClips1, eCAL2.013

Offline Butterfly

  • Original Member
  • *****
  • Posts: 331
  • Country: 00
Re: Need a little help...AGAIN
« Reply #2 on: February 18, 2011, 12:44:29 PM »
Why don't you just go ahead and post it here so everyone can see
But if you rather not I will send you my email

I just traced the coloring page she gave us but it was a chore for me I am glad that I am not the only one who had issues, I thought my issues were because I am so new at it and have to fumble my way through it all because I don't take enough time to play with Ink so I learn quicker
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
I Learn something new every day, I just Forget to remember it
XP, Ink.47, Scal 2, Cricut E
http://darliciouscreations.weebly.com/

Offline PapaSue

  • Original Member
  • *****
  • Posts: 571
    • http://creationsbypapasue.blogspot.com
Re: Need a little help...AGAIN
« Reply #3 on: February 18, 2011, 03:07:10 PM »
Butterfly,  I am more of a "geeky" type than a designer of beautiful work but I keep trying.  So if all of you don't laugh at my attempt to bling this up.  It still needs some touch up since I only wanted to convey how good the basic drawing is and just needed something like this to be "just too cute".

Feel free to work on it and reshare it...I don't mind at all!

« Last Edit: September 01, 2015, 02:13:34 PM by brynn »
Susan
http://creationsbypapasue.blogspot.com/
OLDER:  http://papasuecreative.blogspot.com (blog deleted)
Learn, Grow, Create, Share
Macintosh, Mavericks, Inkscape 0.91, eClips1, eCAL2.013

Offline Butterfly

  • Original Member
  • *****
  • Posts: 331
  • Country: 00
Re: Need a little help...AGAIN
« Reply #4 on: February 18, 2011, 03:43:43 PM »
Thanks that is cool I am grateful for the help
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
I Learn something new every day, I just Forget to remember it
XP, Ink.47, Scal 2, Cricut E
http://darliciouscreations.weebly.com/