• December 13, 2019, 12:16:20 AM
• Welcome, Guest. Please login or register.

The Future of this Forum:

The Inkscape Project opened its first official forum on its website this month (August 2019). https://inkscape.org/forums/ In an effort to combine all the different forums into one, this forum will no longer be accepting new members or new messages. However, it will remain open for a little while, for existing members, to have access to their contents, if they need them.

Any potential new members should register on the new forum, and post their message there. There is a special board for questions about using Inkscape for cutting machines (of all kinds). (https://inkscape.org/forums/cutplot/)

If you have any questions or comments (and you're an existing member) you can post them here.

Although I've been planning to put this forum in read-only mode, at the time of this transition, unfortunately, my personal circumstances have changed, and I won't be able to host this forum much longer. I'm not sure about the time frame. It could be as soon as the end of 2019, or as long as a year from now. If anyone is interested in taking it over, please contact me.

-- brynn

Author Topic: silhoette machine  (Read 2942 times)

0 Members and 1 Guest are viewing this topic.

Offline rae7145

  • Original Member
  • *****
  • Posts: 7
silhoette machine
« on: June 19, 2011, 07:39:26 AM »
hi im having problemswith my silhouette machine when i go to cut a design it wont start it says cut has been succesful but it hasnt budged can anybody help pleaseim hopeing i dont have to get a new machine
ment to say theres nothing waiting to be cut
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline Angel13

  • Original Member
  • *****
  • Posts: 635
  • Country: 00
    • http://cardsulike.blogspot.com/
Re: silhoette machine
« Reply #1 on: June 19, 2011, 12:11:09 PM »
Hi Rae

You don't seem to be having very good luck with your Silhouette, first thing to try again is the printers queue; double click on all the printers in your Printers panel and make sure there are no jobs waiting. If you find that all are empty then I suggest you try a cut using the old Robomaster software....Let me know what happened.....
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Windows Vista, Silhouette Cutter same as Craft Robo(Mini Expert) Cameo Beginner, Inkscape, Cougar(Learning curb going on!!)