• July 20, 2019, 06:58:28 PM
• Welcome, Guest. Please login or register.

The Future of this Forum:

The Inkscape Project will open its first official forum, on the Inkscape website, this August (2019). (Address/link will be provided at that time.) When that happens, new registrations will no longer be allowed in this forum and Inkscape support will be provided in the new forum. This forum will still be open for a while, so that existing topics can be finished, and existing users can have access to their contents. But all potential new members should register on the Inkscape website, and post their questions in the new forum, starting in August. If you have any questions or comments, you can post them here.

Although I've been planning to put this forum in read-only mode, at the time of this transition, unfortunately, my personal circumstances have changed, and I won't be able to host this forum much longer. If anyone is interested in taking it over, please contact me.

-- brynn


Author Topic: Print and Cut Tiled Clones using Clip Set  (Read 2701 times)

0 Members and 1 Guest are viewing this topic.

Offline PapaSue

  • Original Member
  • *****
  • Posts: 571
    • http://creationsbypapasue.blogspot.com
Print and Cut Tiled Clones using Clip Set
« on: June 23, 2011, 03:37:17 PM »
It all started with creating this image using tiled clones and clip set but I couldn't consistently recreate the technique so I worked on it.

tiledclonebird.png
*tiledclonebird.png
(17.41 kB . 269x160)
(viewed 198 times)


Well finally got something that works for me and one that I could explain how I did it. I created the paper with Tiled Clones and used Clip Set to cut out my element.  I know there are other ways but this works for me.  You can see it on my blog or go to the direct link to YouTube below.

Screen shot 2011-06-23 at 12.43.12 PM.png
*Screen shot 2011-06-23 at 12.43.12 PM.png
(67.9 kB . 471x566)
(viewed 298 times)



I am indebted to this forum and its members for the many posts about tiled clones and clip set.  I couldn't have done it without you!



I'd love to hear if it works for you.
« Last Edit: September 01, 2015, 12:25:51 PM by brynn »
Susan
http://creationsbypapasue.blogspot.com/
OLDER:  http://papasuecreative.blogspot.com (blog deleted)
Learn, Grow, Create, Share
Macintosh, Mavericks, Inkscape 0.91, eClips1, eCAL2.013

Offline Angel13

  • Original Member
  • *****
  • Posts: 635
  • Country: 00
    • http://cardsulike.blogspot.com/
Re: Print and Cut Tiled Clones using Clip Set
« Reply #1 on: June 24, 2011, 04:14:54 AM »
Hoooo PapaSue as I'm watching your Youtube video, you will have to imagine me saying 'OOO 'Aahhhh and 'I didn't know that' and 'wha hay lovely'..... I just need to finish some files and then I will try out your tuts later.......
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
http://cardsulike.blogspot.com/
http://www.craftsuprint.com/default.cfm?designer=379

Windows Vista, Silhouette Cutter same as Craft Robo(Mini Expert) Cameo Beginner, Inkscape, Cougar(Learning curb going on!!)

Offline cleversomeday

  • Original Member
  • *****
  • Posts: 78
  • Country: 00
    • Clever Someday
Re: Print and Cut Tiled Clones using Clip Set
« Reply #2 on: June 24, 2011, 05:17:07 PM »
Great tutorial, Sue. Thanks so much for doing this!
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
-Kay
visit my blog http://cleversomeday.com

Offline Laurianne

  • Original Member
  • *****
  • Posts: 258
  • Country: us
  • Gender: Female
    • Eye Draw It, Red Cabin Studio
Re: Print and Cut Tiled Clones using Clip Set
« Reply #3 on: June 28, 2011, 11:50:21 AM »
Great job with the tutorial.  It was a big help to me!
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »

Offline Aussie Carolyn

  • Original Member
  • *****
  • Posts: 1,025
  • Country: au
  • Gender: Female
    • Cut Two Pieces
Re: Print and Cut Tiled Clones using Clip Set
« Reply #4 on: July 03, 2011, 04:40:53 AM »
I managed to watch the video at long last and learned a few new things, thank you. I really like the bit at the end where you found out how to have just the shape.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »