• November 22, 2019, 07:52:24 PM
• Welcome, Guest. Please login or register.

The Future of this Forum:

The Inkscape Project opened its first official forum on its website this month (August 2019). https://inkscape.org/forums/ In an effort to combine all the different forums into one, this forum will no longer be accepting new members or new messages. However, it will remain open for a little while, for existing members, to have access to their contents, if they need them.

Any potential new members should register on the new forum, and post their message there. There is a special board for questions about using Inkscape for cutting machines (of all kinds). (https://inkscape.org/forums/cutplot/)

If you have any questions or comments (and you're an existing member) you can post them here.

Although I've been planning to put this forum in read-only mode, at the time of this transition, unfortunately, my personal circumstances have changed, and I won't be able to host this forum much longer. I'm not sure about the time frame. It could be as soon as the end of 2019, or as long as a year from now. If anyone is interested in taking it over, please contact me.

-- brynn


Author Topic: Dynamic Outset?  (Read 3490 times)

0 Members and 1 Guest are viewing this topic.

Offline PapaSue

  • Original Member
  • *****
  • Posts: 571
    • http://creationsbypapasue.blogspot.com
Dynamic Outset?
« on: July 28, 2010, 11:10:44 AM »
I use this feature all of the time but it "rounds" the edges.  I thought I saw somewhere that someone figured out how to control it so that it doesn't warp so much.

Any ideas?
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Susan
http://creationsbypapasue.blogspot.com/
OLDER:  http://papasuecreative.blogspot.com (blog deleted)
Learn, Grow, Create, Share
Macintosh, Mavericks, Inkscape 0.91, eClips1, eCAL2.013

Offline HeatherM

  • Original Member
  • *****
  • Posts: 207
  • Country: 00
    • http://imagesbyheatherm.wordpress.com/
Re: Dynamic Outset?
« Reply #1 on: July 28, 2010, 12:22:35 PM »
Your best option for keeping sharp corners sharp is to duplicate your artwork, then set a stroke on one that gives you the outset that you want, use Stroke to path, then select both the original artwork and the stroke to path artwork and use Union.  You could break apart the stroke to path version and delete the extra pieces, but it's much faster to just use Union.

Another option is Path/Outset.  This doesn't round the corners as much as Dynamic offset, but it also doesn't give you the control.   :)
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »
Heather
http://imagesbyheatherm.wordpress.com/
Mac OSX, Inkscape, eClips, Silhouette Cameo

Offline Aussie Carolyn

  • Original Member
  • *****
  • Posts: 1,025
  • Country: au
  • Gender: Female
    • Cut Two Pieces
Re: Dynamic Outset?
« Reply #2 on: July 28, 2010, 02:37:25 PM »
Hi Susan, I do pretty much the same as Heather does. It is very fast when you get into the habit of doing it.
I do have another way I have just found out about but have not tested it on squares. I will let you know how it goes.
« Last Edit: December 31, 1969, 05:00:00 PM by Guest »