• February 16, 2020, 01:26:34 PM
• Welcome, Guest. Please login or register.

The Future of this Forum:

The Inkscape Project opened its first official forum on its website this month (August 2019). https://inkscape.org/forums/ In an effort to combine all the different forums into one, this forum will no longer be accepting new members or new messages. However, it will remain open for a little while, for existing members, to have access to their contents, if they need them.

Any potential new members should register on the new forum, and post their message there. There is a special board for questions about using Inkscape for cutting machines (of all kinds). (https://inkscape.org/forums/cutplot/)

If you have any questions or comments (and you're an existing member) you can post them here.

Although I've been planning to put this forum in read-only mode, at the time of this transition, unfortunately, my personal circumstances have changed, and I won't be able to host this forum much longer. I'm not sure about the time frame. It could be as soon as the end of 2019, or as long as a year from now. If anyone is interested in taking it over, please contact me.

-- brynn

Author Topic: Eggbot Hatch and Twist  (Read 3193 times)

0 Members and 1 Guest are viewing this topic.

Offline PapaSue

  • Original Member
  • *****
  • Posts: 571
    • http://creationsbypapasue.blogspot.com
Eggbot Hatch and Twist
« on: July 27, 2012, 09:52:12 AM »
I used the Eggbot/hatch in a recent post and got a question about where I got it and how to use it.  I've searched and searched here to find the original post where it was mentioned and can't find it and the search engine doesn't seem to work either.  It must be buried in another post so here are some links.

http://wiki.evilmadscience.com/Installi ... n.com/view
http://code.google.com/p/eggbotcode/dow ... l:Featured

Using TWIST:  http://www.inkscapecuttingdesign.com/smf/index.php?topic=922.0

Susan BlueRobot has a written tutorial on her blog for filling text with Hatch.
http://susanbluerobot.blogspot.com/2012 ... tting.html
« Last Edit: August 30, 2015, 07:29:32 AM by brynn »
OLDER:  http://papasuecreative.blogspot.com (blog deleted)
Learn, Grow, Create, Share
Macintosh, Mavericks, Inkscape 0.91, eClips1, eCAL2.013

Offline Aussie Carolyn

  • Original Member
  • *****
  • Posts: 1,025
  • Country: au
  • Gender: Female
    • Cut Two Pieces
Re: Eggbot Hatch and Twist
« Reply #1 on: July 27, 2012, 04:18:13 PM »
Found http://www.inkscapecuttingdesign.com/smf/index.php?topic=712.0
I will go and edit my post and add the link to Susan's blog post.
« Last Edit: August 30, 2015, 07:30:08 AM by brynn »