• July 18, 2019, 04:19:22 PM
• Welcome, Guest. Please login or register.

The Future of this Forum:

The Inkscape Project will open its first official forum, on the Inkscape website, this August (2019). (Address/link will be provided at that time.) When that happens, new registrations will no longer be allowed in this forum and Inkscape support will be provided in the new forum. This forum will still be open for a while, so that existing topics can be finished, and existing users can have access to their contents. But all potential new members should register on the Inkscape website, and post their questions in the new forum, starting in August. If you have any questions or comments, you can post them here.

Although I've been planning to put this forum in read-only mode, at the time of this transition, unfortunately, my personal circumstances have changed, and I won't be able to host this forum much longer. If anyone is interested in taking it over, please contact me.

-- brynn


Author Topic: Eggbot Hatch and Twist  (Read 2784 times)

0 Members and 1 Guest are viewing this topic.

Offline PapaSue

  • Original Member
  • *****
  • Posts: 571
    • http://creationsbypapasue.blogspot.com
Eggbot Hatch and Twist
« on: July 27, 2012, 09:52:12 AM »
I used the Eggbot/hatch in a recent post and got a question about where I got it and how to use it.  I've searched and searched here to find the original post where it was mentioned and can't find it and the search engine doesn't seem to work either.  It must be buried in another post so here are some links.

http://wiki.evilmadscience.com/Installi ... n.com/view
http://code.google.com/p/eggbotcode/dow ... l:Featured

Using TWIST:  http://www.inkscapecuttingdesign.com/smf/index.php?topic=922.0

Susan BlueRobot has a written tutorial on her blog for filling text with Hatch.
http://susanbluerobot.blogspot.com/2012 ... tting.html
« Last Edit: August 30, 2015, 07:29:32 AM by brynn »
Susan
http://creationsbypapasue.blogspot.com/
OLDER:  http://papasuecreative.blogspot.com (blog deleted)
Learn, Grow, Create, Share
Macintosh, Mavericks, Inkscape 0.91, eClips1, eCAL2.013

Offline Aussie Carolyn

  • Original Member
  • *****
  • Posts: 1,025
  • Country: au
  • Gender: Female
    • Cut Two Pieces
Re: Eggbot Hatch and Twist
« Reply #1 on: July 27, 2012, 04:18:13 PM »
Found http://www.inkscapecuttingdesign.com/smf/index.php?topic=712.0
I will go and edit my post and add the link to Susan's blog post.
« Last Edit: August 30, 2015, 07:30:08 AM by brynn »